Recommended for attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75". When clamp is used with Fig. 89 retaining clip, flange thickness may not exceed 0.62". Malleable body assures uniform quality and strength and full thread engagement. Hardened steel cup point set screw for securing to beam flange. Ribbed design of clamp provides added strength.

Manufaturer: Anvil International

Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 3/4". They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions. Secured in place by a cup-pointed set screw tightened against the flange. A jam nut is provided for tightening the set screw against the body casting. Thru tapping of the body casting permits extended adjustment of the threaded rod. Can be used with Fig. 89X retaining clip for seismic applications.

Manufaturer: Anvil International

Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1 1/4". They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions. Secured in place by a cup-pointed set screw tightened against the flange. A jam nut is provided for tightening the set screw against the body casting. Thru tapping of the body casting permits extended adjustment of the threaded rod. Wider throat for attaching to flange with up to 1 1/4" thickness.

Manufaturer: Anvil International

Designed for fastening flange of "W" and "M" beam. Bottom hold tapped to accommodate hanger rod.

Manufaturer: Anvil International