Contains a blend of aramid fibers with a nitrile binder. It has excellent sealability and improved thermal stability. It is good for general service applications. It can be used with media such as water, aliphatic hydrocarbons, oils and gasoline.

Manufaturer: Garlock

Offers a unique blend of aramid fibers, fillers and a NBR rubber binder to provide improved torque retention and drastically lowered emissions levels. Can be used with media such as water, aliphatic hydrocarbons, oils and gasoline.

Manufaturer: Garlock

Pure graphite gasket. Pure exfoliated graphite flake material excels in extreme conditions, withstanding heat, pressure, and aggressive chemicals. Proven fire-safe. Seals easily under moderate bolt load. Offers superior torque retention. Retains dimensional stability in high temperatures. Seals tightly even during pressure fluctuations.

Manufaturer: Garlock

A laminated graphite sheet with a 316SS wire mesh insert. Pure exfoliated graphite flake material excels in extreme conditions, withstanding heat, pressure, and aggressive chemicals. Proven fire-safe. Seals easily under moderate bolt load. Offers superior torque retention. Retains dimensional stability in high temperatures. Seals tightly even during pressure fluctuations.

Manufaturer: Garlock

Laminated graphite gasket with a 316SS foil insert. Pure exfoliated graphite flake material excels in extreme conditions, withstanding heat, pressure, and aggressive chemicals. Proven fire-safe.

Manufaturer: Garlock

A laminated graphite gasket with a 316SS tang insert. Pure exfoliated graphite flake material excels in extreme conditions, withstanding heat, pressure, and aggressive chemicals. Proven fire-safe. Seals easily under moderate bolt load, offers superior torque retention. Retains dimensional stability in high temperatures. Seals tightly even during pressure fluctuations.

Manufaturer: Garlock

High performance multi-layer graphite with 316SS inserts provides high compressive strength, blow-out resistance, excellent handling properties and improved tightness. Carbon content of material is 99.85%. Pure exfoliated graphite flake material excels in extreme conditions, withstanding heat, pressure, and aggressive chemicals. Proven fire-safe. Seals easily under moderate bolt load. Offers superior torque retention Retains dimensional stability in high temperatures. Seals tightly even during pressure fluctuations.

Manufaturer: Garlock

Offers a unique blend of aramid fibers, fillers and a SBR rubber binder provides improved torque retention and drastically lowered emissions levels. Can be used with media such as water.

Manufaturer: Garlock

Offers a unique blend of aramid fibers, fillers and a neoprene rubber binder provides improved torque retention and drastically lowered emissions levels. Can be used with media such as water, refrigerants, oils and fuels.

Manufaturer: Garlock

Offers a unique blend of aramid fibers, fillers and a SBR rubber binder provides improved torque retention and drastically lowered emissions levels. Can be used with media such as water and inert gases.

Manufaturer: Garlock

PTFE gasket with a silica filler. It has an improved performance over conventional PTFE. A unique manufacturing process minimizes cold flow problems typical of skived and expanded PTFE sheets. It withstands a wide range of chemicals for extended service life in a wide variety of applications. It is offered in some of the largest sheet sizes in the industry. It can be used with media such as strong acids (except hydrofluoric), solvents, hydrocarbons, water, steam and chlorine.

Manufaturer: Garlock

PTFE gasket with glass microspheres. It has an improved performance over conventional PTFE. A unique manufacturing process minimizes cold flow problems typical of skived and expanded PTFE sheets. It withstands a wide range of chemicals for extended service life in a wide variety of applications. It is offered in some of the largest sheet sizes in the industry. It can be used with media such as moderate concentrations of acids and some caustics, hydrocarbons, solvents, water and refrigerants.

Manufaturer: Garlock

PTFE gasket with barium sulfate filler. Improved performance over conventional PTFE. Unique manufacturing process minimizes cold flow problems typical of skived and expanded PTFE sheets. Excellent bolt torque retention. Withstands a wide range of chemicals for extended service life in a wide variety of applications. It can be used with media such as strong caustics, moderate acids, chlorine, gases, water, steam and hydrocarbons.

Manufaturer: Garlock

Microcellular PTFE. Highly compressible PTFE seals under low bolt load. Compressible material conforms to surface irregularities, especially on warped, pitted or scratched flanges. Reduced cold flow and creep normally associated with conventional PTFE gaskets. Pure PTFE withstands a wide range of chemicals. It can be used with media such as strong caustics, strong acids, hydrocarbons, chlorine, cryogenics, glasslined equipment.

Manufaturer: Garlock

Microcellular PTFE gasket. Highly compressible PTFE outer layers seal under low bolt load. Compressible layers conform to surface irregularities, especially on warped, pitted or scratched flanges. Rigid PTFE core reduces cold flow and creep normally associated with conventional PTFE gaskets. The rigid core also facilitates installation, especially on large diameter flanges and hard-to-reach areas. Pure PTFE withstands a wide range of chemicals. It can be used with media such as strong caustics, strong acids, hydrocarbons, chlorine and cryogenics. It conforms to FDA regulations.

Manufaturer: Garlock

PTFE with glass filler. Soft, deformable exterior conforms to surface irregularities. Ideal for worn, warped or pitted flanges. Stable blue core improves cold flow resistance. Low bolt load requirements ensure a tight seal on glass-lined or wavy flanges (When sealing uneven flanges, gasket must be four times thicker than maximum gap between flanges). Direct sintering of GYLON® layers prevents leak paths and adhesive contamination. Unitized construction avoids jacket foldover. Rigid core facilitates installation of large gaskets. It can be used with media such as moderate concentrations of acids and caustics, hydrocarbons, solvents, cryogenics, and glass-lined equipment.

Manufaturer: Garlock

Offers a unique blend of aramid fibers, fillers and an EPDM rubber binder provides improved torque retention and drastically lowered emissions levels. Can be used with media such as water and inert gases.

Manufaturer: Garlock

Aramid fibers with a proprietary rubber binder. Creates compressive load in light weight flanges in oil and water service. Seals where standard gaskets won't. More universal than gaskets that swell in oil only. Performs well in flanges that might crush an elastomer gasket, providing use in a wide array of applications. More compressible than standard fiber gaskets and seals with low load. Easy to cut and handle. Extremely flexible, minimizes waste. Replaces vegetable fiber gaskets in many applications. Won't weep, improving plant safety. Seals flanges in "less than perfect" conditions minimizing maintenance. Specify 3760-U for NSF 61 material (Drinking Water). Ideal for compressors, generators, pumps, fuel pumps, gear boxes, cast water flanges, transformers, sight glasses, access covers and handhole/manhole applications.

Manufaturer: Garlock

Inorganic fibers with a nitrile binder. Inorganic fiber gasketing offers excellent thermal stability with minimal weight loss. Reduced creep relaxation and improved torque retention provide optimal sealability. Non-oxidizing fibers withstand a continuous operating temperature of up to 550°F (290°C), and maximum spike of 800°F (425°C). IFG 5500 has passed the Garlock Fire Test and is ABS Fire Safe Type Approved. It can be used with media such as water, aliphatic hydrocarbons, oils, gasoline, inert gases and most refrigerants.

Manufaturer: Garlock

Carbon fiber gasket with a SBR filler. Carbon fiber gasketing excels in the harshest conditions, including intense heat, high pressure and hot oils. Laboratory tested for fire safety. Maintains effective seal during pressure and temperature fluctuations. Superior torque retention lowers leakage rates and reduces maintanance time. It can be used with media such as water, inert gases, mild acids and mild alkalies.

Manufaturer: Garlock

Carbon fibers with a nitrile binder. Carbon fiber gasketing excels in the harshest conditions such as intense heat, high pressure and hot oils. Laboratory-tested for fire safety. Unique manufacturing process minimizes cold flow and creep relaxation problems. Ideal for standard ANSI flanged connectors, as well as turbine crossover piping connectors. Multiple applications in power generation, chemical processing, hydrocarbon processing, and other industries. It can be used with media such as oils, gasoline, water, aliphatic hydrocarbons and most refrigerants.

Manufaturer: Garlock

Graphite fiber gasket with a nitrile binder. Graphite fiber gasketing withstands extreme temperatures and pressures, as well as many chemicals. Passed Garlock fire tests and is ABS Fire Safe Type Approved. Unique manufacturing process minimizes cold flow and creep relaxation problems. Ideal for standard ANSI flanged connectors as well as turbine crossover piping connectors. It can be used with media such as oils, grease and water.

Manufaturer: Garlock